SafetyLink FrogLine Membrane SurfaceLink End Anchor with Toggle Bolts
SafetyLink FrogLine Membrane SurfaceLink End Anchor with Toggle Bolts
The SafetyLink FrogLine Membrane SurfaceLink End Anchor with Toggle Bolts is a 316 stainless steel end anchor for permanent horizontal lifeline systems surface mounted on membrane roofing. The end anchor gives the lifeline cable its attachment points to start and terminate at. Every FrogLine anchor carries an engineered energy absorbing region that minimises loads on users and structures in the event of a fall.
The anchor fixes through the roof with four 300mm toggle bolts and seals to the membrane surface via a 295mm x 295mm SurfaceLink plate, plastic and stainless washers and M16 fixing hardware, all structural parts in 316 stainless steel. Install FrogLine horizontal lifeline systems on roof pitches no greater than 15 degrees along the pitch, and across roof pitches no greater than 25 degrees. Maximum of four users per system and two users per span. The building or structure receiving the anchorages must be assessed by an engineer, unless it is clear to a competent person that the structure is adequate. The system runs continuous connection on 8mm stainless steel cable with the FrogLine shuttle system, and is tested and manufactured in accordance with AS/NZS 1891.2, ANSI Z359.6-2009, EN 795:2012, CEN/TS 16415:2013 and OSHA 1926.502.
Browse anchor points and lifeline systems, and build the run with the FrogLine membrane SurfaceLink intermediate anchor and corner anchor.
Key Features
- End anchor for surface mounted membrane roof lifeline systems
- Engineered energy absorbing region minimises loads on users and structures in a fall
- Supplied with four 300mm toggle bolts and 295mm x 295mm SurfaceLink membrane plate
- Continuous connection with 8mm stainless steel cable and the FrogLine shuttle system
- Suits roof pitches to 15 degrees along and 25 degrees across the pitch
- 316 stainless steel construction
- Tested to AS/NZS 1891.2, ANSI Z359.6-2009, EN 795:2012, CEN/TS 16415:2013 and OSHA 1926.502
Specifications
| Brand | SafetyLink |
| SKU | STAT.FROGSSQ002+TOGGLE |
| Anchor Type | End, surface mounted horizontal lifeline |
| Roof Type | Membrane roofing, surface mounted |
| Roof Pitch | Up to 15 degrees along the pitch, up to 25 degrees across the pitch |
| Material | 316 stainless steel |
| Cable | 8mm stainless steel, FrogLine shuttle system |
| Components | FrogLine Base End, M16 x 35mm bolt, SurfaceLink plate 295mm x 295mm, 70mm OD washers, M16 nut, 4 x 300mm toggle bolts |
| Users | Max 4 per system, max 2 per span |
| Standards | AS/NZS 1891.2, ANSI Z359.6-2009, EN 795:2012, CEN/TS 16415:2013 and OSHA 1926.502 |
Product Documents
Which roofs does this anchor suit?
It is designed for permanent horizontal lifeline systems surface mounted on membrane roofing, on pitches no greater than 15 degrees along the pitch and no greater than 25 degrees across the pitch.
How is it fixed to the roof?
Four 300mm toggle bolts secure the 295mm x 295mm SurfaceLink plate through the roof, with plastic and stainless washers and M16 hardware completing the assembly.
How many users can the system carry?
Maximum of four users per system and two users per span, using continuous connection on 8mm stainless steel cable with the FrogLine shuttle system.
We offer fast delivery throughout Australia and aim to dispatch orders as quickly as possible.
With many products in stock ready for immediate dispatch and the option to ship directly from our supplier warehouses, we ensure your items arrive promptly and securely. If you need urgent delivery or have specific requirements, our team is here to assist.
Please take a moment to review our delivery and returns policy before placing your order. If you have any questions, need to check stock availability, require urgent delivery, or wish to discuss a large order, don’t hesitate to get in touch with us.
DISPATCH & DELIVERY TIMES
Most orders are dispatched within 1-3 business days, though during busy periods or in the event of unexpected delays, please allow up to 5 business days for dispatch.
Orders are sent either from our warehouse in Sydney or directly from our suppliers warehouses in Sydney, Brisbane, and Perth. Delivery times will vary based on your location, but we always aim to get your products to you as quickly as possible.
You’ll receive tracking details via email once your order has been dispatched.
OUT OF STOCK ITEMS
Occasionally an item in your order may be out of stock. If this happens, we’ll confirm the expected restock date with our supplier and contact you promptly. You can choose either to request a full refund or place the item on backorder and receive it as soon as it’s back in stock.
URGENT ORDERS - Same Day Dispatch
If you need your order urgently, please get in touch. For a small admin fee, we can arrange same-day or next-day dispatch.
WAREHOUSE PICKUP
Some products are available for direct pickup from our warehouse or our suppliers' warehouses (located in Sydney, Brisbane, and Perth). Please contact us to confirm stock availability and arrange your pickup.
DELIVERY ADDRESS
Please provide a street address where you or an authorised person will be available to receive your parcel during normal business hours. We cannot deliver to P.O. Boxes.
DELIVERY COSTS
- Orders over $500 receive free delivery (excluding large bulky items or very remote locations)
- Orders under $500 incur a flat-rate delivery fee of $25 (+GST)
- Small orders under $150 are also subject to a $15 (+GST) small order surcharge
DELIVERY DAMAGE
Please inspect your package upon arrival. If you notice any damage, be sure to note it when signing for delivery. If your item arrives damaged, please email photos to returns@heightsafetycentral.com.au and we will process a claim with the supplier or courier.
Cancellations & Refunds
CHANGE OF MIND RETURNS
We generally do not accept cancellations or returns due to change of mind. Please contact us before ordering if you have any questions or concerns regarding the suitability of a product. If you have ordered the wrong item and it is still in brand-new condition, we may, at our discretion, accept a return. A restocking fee (usually 15-20%) will apply, and you will be responsible for returning the item to our warehouse or the supplier’s warehouse.
ORDERED-IN PRODUCTS / CUSTOM MADE ITEMS
It is not possible to cancel an order for an item which has been specifically ordered-in for you or to refund / cancel an order for a custom made item. There are no exceptions to this.Â
WARRANTY CLAIM / DEFECTIVE PRODUCTSÂ
While rare, if a product you’ve purchased develops a fault, please email info@heightsafetycentral.com.au with a detailed description and photos (if possible). We will work with the supplier to resolve the issue as quickly as possible. If the supplier accepts the warranty claim, your refund will be issued to the original payment method.